Avionics and integration
How I fit flight controllers, servo power, sensors, and antennas into the airframes I work on.
Electrical layout · mechanical mounting · service access
Compact Pusher Wing: Elevons and Avionics Layout
Elevon linkage geometry, battery leads, and antenna routing on a foam pusher wing.
Conscendo FPV Conversion
How I fit FPV hardware in the Conscendo without giving up access to the battery.
Printed FPV Camera Nose for a Flying Wing
A removable printed nose with a lens opening, vents, and an antenna exit for my flying wing.
Compact FPV Quadcopter: Frame, Canopy, and Wiring
The printed frame, removable camera canopy, and harness on my compact FPV quad.
Portable FPV Ground Station: Printed Stand and Transmitter Mount
My printed FPV monitor stand, battery cradle, and display mount for the RadioMaster TX16S.
Inside a Flying Wing Avionics Bay
A shaped wood avionics plate, separate video hardware, and antenna routing inside a foam wing.
Foam Aircraft: Avionics Installation Notes
Controller mounts, separate servo power, and pushrod clearance in foam aircraft.
Building and Tuning a Quad With 10 Inch Props
An INAV quad with 10 inch props. Power wiring, gyro noise, navigation, and tuning.
Parrot Disco: LTE Conversion and Airframe Rebuild
How I added LTE to my Parrot Disco, mounted the PCB antenna, and moved the controller to another airframe after a crash.
