https://charlespyrce.tech/projects/2026-11-06T22:16:43+00:00weekly0.6https://charlespyrce.tech/2026/01/21/model-rocket-video-transmission-avionics-stack/https://charlespyrce.tech/wp-content/uploads/2026/01/img_3726.jpegIMG_3726https://charlespyrce.tech/wp-content/uploads/2026/01/img_3725.jpegIMG_3725The payload installed within the rocket body. Source: IMG_3725.https://charlespyrce.tech/wp-content/uploads/2026/01/img_3367.jpegIMG_3367The payload's side openings provide a view of the camera, electronics, and wiring. Source: IMG_3367.https://charlespyrce.tech/wp-content/uploads/2026/01/img_3370-e1769022187294.jpegIMG_3370The standalone imaging module, with the camera opening and heatsink visible. Source: IMG_3370.2026-11-06T22:16:34+00:00monthlyhttps://charlespyrce.tech/2025/11/23/reverse-engineering-the-parrot-disco-into-a-long-range-4g-uav/https://charlespyrce.tech/wp-content/uploads/2025/11/disco-field-front-view.webpDisco field photographField view documenting the nose camera, underbody supports, and visible antenna. Source: IMG_0478.jpeg.https://charlespyrce.tech/wp-content/uploads/2025/11/disco-fin-mounted-antenna.webpDisco fin-mounted antennaAn antenna board mounted on an orange fin, with the coaxial feed routed into the fuselage. Source: IMG_0261.jpeg.https://charlespyrce.tech/wp-content/uploads/2025/11/disco-open-avionics-cover.webpDisco removable cover and avionicsThe opened cover exposes attached electronics, antenna connections, and the controller carrier. Source: IMG_0235.jpeg.https://charlespyrce.tech/wp-content/uploads/2025/11/disco-airframe-mounting.webpDisco airframe and printed attachmentsAirframe installation showing orange printed attachment points and routed wiring. Source: IMG_0202.jpeg.https://charlespyrce.tech/wp-content/uploads/2025/11/img_0554.jpegIMG_0554https://charlespyrce.tech/wp-content/uploads/2025/11/img_0695.jpegIMG_0695The red printed support around the controller and the battery/power-connector arrangement. Source: IMG_0695.https://charlespyrce.tech/wp-content/uploads/2025/11/image-6.pngimageThe gray replacement aircraft photographed on the ground. The image records the installation, not the cause of an earlier failure.https://charlespyrce.tech/wp-content/uploads/2025/11/image-5.pngimagehttps://charlespyrce.tech/wp-content/uploads/2025/11/image-4.pngimageA head-on field view of the Disco airframe and camera opening.https://charlespyrce.tech/wp-content/uploads/2025/11/broken.pngbroken2026-11-06T22:16:33+00:00monthlyhttps://charlespyrce.tech/2026/11/06/flying-wing-avionics-bay/2026-11-06T22:14:35+00:00monthlyhttps://charlespyrce.tech/2026/11/06/foam-aircraft-twin-motor-avionics-integration/2026-11-06T22:14:34+00:00monthlyhttps://charlespyrce.tech/contact-me/2026-11-06T22:14:32+00:00weekly0.6https://charlespyrce.tech/2025/11/25/building-a-long-range-10-inch-uav-platform/https://charlespyrce.tech/wp-content/uploads/2025/11/img_4845-1.jpegIMG_4845Field photograph of the assembled aircraft. Source: IMG_4845.https://charlespyrce.tech/wp-content/uploads/2025/11/img_4654.jpeg10-inch UAV | AircraftFPV camera mounting and wiring close-up. Source: IMG_4654. Exact aircraft association remains unverified.https://charlespyrce.tech/wp-content/uploads/2025/11/img_4845.jpegIMG_4845https://charlespyrce.tech/wp-content/uploads/2025/11/10-pt1.png10 pt1An assembled view of the large multirotor platform.2026-11-06T22:14:31+00:00monthlyhttps://charlespyrce.tech/about/2026-11-06T22:14:29+00:00weekly0.6https://charlespyrce.techdaily1.02026-11-06T22:16:43+00:00